dmesg - test 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-23-generic (buildd@brownie) (gcc version 4.8.2 (Ubuntu 4.8.2-17ubuntu2) ) #45-Ubuntu SMP Fri Apr 4 06:58:38 UTC 2014 (Ubuntu 3.13.0-23.45-generic 3.13.8)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-23-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c97fbfff] usable
BIOS-e820: [mem 0x00000000c97fc000-0x00000000c9802fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9803000-0x00000000ca081fff] usable
BIOS-e820: [mem 0x00000000ca082000-0x00000000ca30cfff] reserved
BIOS-e820: [mem 0x00000000ca30d000-0x00000000cd91dfff] usable
BIOS-e820: [mem 0x00000000cd91e000-0x00000000cdb11fff] reserved
BIOS-e820: [mem 0x00000000cdb12000-0x00000000cde50fff] usable
BIOS-e820: [mem 0x00000000cde51000-0x00000000ceb1bfff] ACPI NVS
BIOS-e820: [mem 0x00000000ceb1c000-0x00000000cef53fff] reserved
BIOS-e820: [mem 0x00000000cef54000-0x00000000ceffefff] type 20
BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000cfc00000-0x00000000dfdfffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f1fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xcead8000 ACPI 2.0=0xcead8000 SMBIOS=0xcef52318
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014ff000) (19MB)
efi: mem05: type=7, attr=0xf, range=[0x00000000014ff000-0x0000000002000000) (11MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033ff000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000033ff000-0x00000000346b8000) (786MB)
efi: mem08: type=2, attr=0xf, range=[0x00000000346b8000-0x0000000036354000) (28MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000036354000-0x00000000937f0000) (1492MB)
efi: mem10: type=2, attr=0xf, range=[0x00000000937f0000-0x00000000c642c000) (812MB)
efi: mem11: type=7, attr=0xf, range=[0x00000000c642c000-0x00000000c94f4000) (48MB)
efi: mem12: type=2, attr=0xf, range=[0x00000000c94f4000-0x00000000c96c8000) (1MB)
efi: mem13: type=1, attr=0xf, range=[0x00000000c96c8000-0x00000000c97fc000) (1MB)
efi: mem14: type=10, attr=0xf, range=[0x00000000c97fc000-0x00000000c9803000) (0MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000c9803000-0x00000000c9957000) (1MB)
efi: mem16: type=3, attr=0xf, range=[0x00000000c9957000-0x00000000ca042000) (6MB)
efi: mem17: type=4, attr=0xf, range=[0x00000000ca042000-0x00000000ca05f000) (0MB)
efi: mem18: type=3, attr=0xf, range=[0x00000000ca05f000-0x00000000ca079000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000ca079000-0x00000000ca082000) (0MB)
efi: mem20: type=6, attr=0x800000000000000f, range=[0x00000000ca082000-0x00000000ca30d000) (2MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000ca30d000-0x00000000ca31c000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000ca31c000-0x00000000ca329000) (0MB)
efi: mem23: type=2, attr=0xf, range=[0x00000000ca329000-0x00000000ca32b000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000ca32b000-0x00000000cafc9000) (12MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000cafc9000-0x00000000cb271000) (2MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000cb271000-0x00000000cb2a3000) (0MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000cb2a3000-0x00000000cb2c3000) (0MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000cb2c3000-0x00000000cb2d3000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000cb2d3000-0x00000000cb363000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000cb363000-0x00000000cb370000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000cb370000-0x00000000cb387000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000cb387000-0x00000000cb38e000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000cb38e000-0x00000000cb4c1000) (1MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000cb4c1000-0x00000000cb4c7000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000cb4c7000-0x00000000cb5f2000) (1MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000cb5f2000-0x00000000cb5f6000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000cb5f6000-0x00000000cb7f5000) (1MB)
efi: mem38: type=7, attr=0xf, range=[0x00000000cb7f5000-0x00000000cb7f6000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000cb7f6000-0x00000000cb861000) (0MB)
efi: mem40: type=7, attr=0xf, range=[0x00000000cb861000-0x00000000cb862000) (0MB)
efi: mem41: type=4, attr=0xf, range=[0x00000000cb862000-0x00000000ccc9e000) (20MB)
efi: mem42: type=7, attr=0xf, range=[0x00000000ccc9e000-0x00000000cd653000) (9MB)
efi: mem43: type=3, attr=0xf, range=[0x00000000cd653000-0x00000000cd91e000) (2MB)
efi: mem44: type=0, attr=0xf, range=[0x00000000cd91e000-0x00000000cd985000) (0MB)
efi: mem45: type=0, attr=0xf, range=[0x00000000cd985000-0x00000000cdb12000) (1MB)
efi: mem46: type=7, attr=0xf, range=[0x00000000cdb12000-0x00000000cde47000) (3MB)
efi: mem47: type=2, attr=0xf, range=[0x00000000cde47000-0x00000000cde51000) (0MB)
efi: mem48: type=10, attr=0xf, range=[0x00000000cde51000-0x00000000ceafc000) (12MB)
efi: mem49: type=10, attr=0xf, range=[0x00000000ceafc000-0x00000000ceb07000) (0MB)
efi: mem50: type=10, attr=0xf, range=[0x00000000ceb07000-0x00000000ceb1c000) (0MB)
efi: mem51: type=6, attr=0x800000000000000f, range=[0x00000000ceb1c000-0x00000000cee7d000) (3MB)
efi: mem52: type=6, attr=0x800000000000000f, range=[0x00000000cee7d000-0x00000000ceeb3000) (0MB)
efi: mem53: type=6, attr=0x800000000000000f, range=[0x00000000ceeb3000-0x00000000ceeb5000) (0MB)
efi: mem54: type=6, attr=0x800000000000000f, range=[0x00000000ceeb5000-0x00000000cef54000) (0MB)
efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000cef54000-0x00000000cef76000) (0MB)
efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000cef76000-0x00000000cefff000) (0MB)
efi: mem57: type=4, attr=0xf, range=[0x00000000cefff000-0x00000000cf000000) (0MB)
efi: mem58: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f200000) (4594MB)
efi: mem59: type=0, attr=0x8000000000000000, range=[0x00000000cfc00000-0x00000000dfe00000) (258MB)
efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem65: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. UX301LAA/UX301LAA, BIOS UX301LAA.206 12/31/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f200 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00D0000000 mask 7FF0000000 uncachable
4 base 00CFC00000 mask 7FFFC00000 uncachable
5 base 021F800000 mask 7FFF800000 uncachable
6 base 021F400000 mask 7FFFC00000 uncachable
7 base 021F200000 mask 7FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3328MB, range: 256MB, type UC
reg 4, base: 3324MB, range: 4MB, type UC
reg 5, base: 8696MB, range: 8MB, type UC
reg 6, base: 8692MB, range: 4MB, type UC
reg 7, base: 8690MB, range: 2MB, type UC
total RAM covered: 7918M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3324MB, range: 4MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8690MB, range: 2MB, type UC
reg 7, base: 8692MB, range: 4MB, type UC
reg 8, base: 8696MB, range: 8MB, type UC
e820: update [mem 0xcfc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fdd000, 0x02fddfff] PGTABLE
BRK [0x02fde000, 0x02fdefff] PGTABLE
BRK [0x02fdf000, 0x02fdffff] PGTABLE
init_memory_mapping: [mem 0x21f000000-0x21f1fffff]
[mem 0x21f000000-0x21f1fffff] page 2M
BRK [0x02fe0000, 0x02fe0fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21effffff]
[mem 0x21c000000-0x21effffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc97fbfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc95fffff] page 2M
[mem 0xc9600000-0xc97fbfff] page 4k
init_memory_mapping: [mem 0xc9803000-0xca081fff]
[mem 0xc9803000-0xc99fffff] page 4k
[mem 0xc9a00000-0xc9ffffff] page 2M
[mem 0xca000000-0xca081fff] page 4k
BRK [0x02fe1000, 0x02fe1fff] PGTABLE
BRK [0x02fe2000, 0x02fe2fff] PGTABLE
init_memory_mapping: [mem 0xca30d000-0xcd91dfff]
[mem 0xca30d000-0xca3fffff] page 4k
[mem 0xca400000-0xcd7fffff] page 2M
[mem 0xcd800000-0xcd91dfff] page 4k
init_memory_mapping: [mem 0xcdb12000-0xcde50fff]
[mem 0xcdb12000-0xcdbfffff] page 4k
[mem 0xcdc00000-0xcddfffff] page 2M
[mem 0xcde00000-0xcde50fff] page 4k
init_memory_mapping: [mem 0xcefff000-0xceffffff]
[mem 0xcefff000-0xceffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x346b8000-0x36353fff]
ACPI: RSDP 00000000cead8000 000024 (v02 _ASUS_)
ACPI: XSDT 00000000cead8098 0000B4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 00000000ceaee858 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 00000000cead8260 0165F8 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
ACPI: FACS 00000000ceb19080 000040
ACPI: APIC 00000000ceaee968 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FPDT 00000000ceaee9e0 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 00000000ceaeea28 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: LPIT 00000000ceaeeaf0 00005C (v01 _ASUS_ Notebook 00000000 AMI. 00000005)
ACPI: SSDT 00000000ceaeeb50 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000ceaef090 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 00000000ceaefb68 0002DE (v01 PmRef Cpu0Tst 00003000 INTL 20120711)
ACPI: SSDT 00000000ceaefe48 000348 (v01 PmRef ApTst 00003000 INTL 20120711)
ACPI: MCFG 00000000ceaf0190 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SSDT 00000000ceaf01d0 003043 (v01 DptfTa DptfTabl 00001000 INTL 20120711)
ACPI: HPET 00000000ceaf3218 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 00000000ceaf3250 0002D7 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 00000000ceaf3528 003DFF (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 00000000ceaf7328 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
ACPI: DMAR 00000000ceaf7360 0000A8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: SSDT 00000000ceaf7408 0006D9 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
ACPI: MSDM 00000000cdb10e18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f1fffff]
Initmem setup node 0 [mem 0x00000000-0x21f1fffff]
NODE_DATA [mem 0x21f1f4000-0x21f1f8fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216c00000-ffff88021e7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21f1fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00057fff]
node 0: [mem 0x00059000-0x0009dfff]
node 0: [mem 0x00100000-0xc97fbfff]
node 0: [mem 0xc9803000-0xca081fff]
node 0: [mem 0xca30d000-0xcd91dfff]
node 0: [mem 0xcdb12000-0xcde50fff]
node 0: [mem 0xcefff000-0xceffffff]
node 0: [mem 0x100000000-0x21f1fffff]
On node 0 totalpages: 2018152
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13096 pages used for memmap
DMA32 zone: 838092 pages, LIFO batch:31
Normal zone: 18376 pages used for memmap
Normal zone: 1176064 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc97fc000-0xc9802fff]
PM: Registered nosave memory: [mem 0xca082000-0xca30cfff]
PM: Registered nosave memory: [mem 0xcd91e000-0xcdb11fff]
PM: Registered nosave memory: [mem 0xcde51000-0xceb1bfff]
PM: Registered nosave memory: [mem 0xceb1c000-0xcef53fff]
PM: Registered nosave memory: [mem 0xcef54000-0xceffefff]
PM: Registered nosave memory: [mem 0xcf000000-0xcfbfffff]
PM: Registered nosave memory: [mem 0xcfc00000-0xdfdfffff]
PM: Registered nosave memory: [mem 0xdfe00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfe00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021ee00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1986594
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-23-generic.efi.signed root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7792408K/8072608K available (7336K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 280200K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:984 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 32505856 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2793.782 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.56 BogoMIPS (lpj=11175128)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28406 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000cdaa9000 end: 0x000000cdab5fff
dmar: RMRR base: 0x000000cfc00000 end: 0x000000dfdfffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4558U CPU @ 2.80GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (22350.25 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc97fc000-0xc9802fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcde51000-0xceb1bfff] (13414400 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:15:09, date: 04/06/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000cdb07c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000cdb07618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000cdb06d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a2e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7d1c000-0xf7d1ffff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xf7d10000-0xf7d17fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d24000-0xf7d2401f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d18000-0xf7d1bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d22000-0xf7d227ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d21000-0xf7d210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf7d20000-0xf7d20fff 64bit]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc97fc000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca082000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd91e000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcde51000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x21f200000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1c00-0x1cfe] has been reserved
system 00:04: [io 0x1d00-0x1dfe] has been reserved
system 00:04: [io 0x1e00-0x1efe] has been reserved
system 00:04: [io 0x1f00-0x1ffe] has been reserved
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x0240-0x0259] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0xdfe00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29296K (ffff8800346b8000 - ffff880036354000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc57fc000-0xc97fc000] (64MB) mapped at [ffff8800c57fc000-ffff8800c97fbfff]
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1396826109.572:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15356
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 14400k, total 14400k
efifb: mode is 2560x1440x32, linelength=10240, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 320x90
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (61 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-23-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-23-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
ACPI: Battery Slot [BAT0] (battery present)
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b837d9d6cb7099efeaff27e737e2d8b708cd409a'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:597:301
tty tty30: hash matches
rtc_cmos 00:05: setting system clock to 2014-04-06 23:15:09 UTC (1396826109)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000272d000 - ffff880002800000)
Freeing unused kernel memory: 708K (ffff880002b4f000 - ffff880002c00000)
systemd-udevd[116]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d22000 port 0xf7d22100 irq 59
ata2: SATA max UDMA/133 abar m2048@0xf7d22000 port 0xf7d22180 irq 59
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 e10000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 60 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-4: new full-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: ATA-8: SanDisk SD6SP1M128G1002, X231202, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SP1M1 X231 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-4: New USB device found, idVendor=8087, idProduct=07dc
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-5: new high-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=1bcf, idProduct=2987
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: HD WebCam
usb 1-5: Manufacturer: SunplusIT INC.
usb 1-5: SerialNumber: HF1019-P85A-SN01-REV0100
usb 1-7: new full-speed USB device number 5 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: ATA-8: SanDisk SD6SP1M128G1002, X231202, max UDMA/133
ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk SD6SP1M1 X231 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-7: New USB device found, idVendor=03eb, idProduct=8a0c
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: Atmel maXTouch Digitizer
usb 1-7: Manufacturer: Atmel
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:03EB:8A0C.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1
usb 1-1.1: new high-speed USB device number 6 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB2.0 Hub
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2793.533 MHz
usb 1-1.2: new high-speed USB device number 7 using xhci_hcd
usb 1-1.2: New USB device found, idVendor=058f, idProduct=6366
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: Mass Storage Device
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 058F0O1111B1
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
usb 1-1.4: new full-speed USB device number 8 using xhci_hcd
usb 1-1.4: New USB device found, idVendor=1532, idProduct=0037
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Razer DeathAdder 2013
usb 1-1.4: Manufacturer: Razer
input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
hid-generic 0003:1532:0037.0003: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1.4/input0
input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input9
hid-generic 0003:1532:0037.0004: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1.4/input1
input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input10
hid-generic 0003:1532:0037.0005: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1.4/input2
usb 1-1.1.2: new full-speed USB device number 9 using xhci_hcd
usb 1-1.1.2: New USB device found, idVendor=195d, idProduct=2030
usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1.2: Product: Gaming keyboard
input: Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input11
hid-generic 0003:195D:2030.0006: input,hidraw4: USB HID v1.11 Keyboard [Gaming keyboard] on usb-0000:00:14.0-1.1.2/input0
input: Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.1/input/input12
hid-generic 0003:195D:2030.0007: input,hidraw5: USB HID v1.11 Device [Gaming keyboard] on usb-0000:00:14.0-1.1.2/input1
input: Gaming keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.2/input/input13
hid-generic 0003:195D:2030.0008: input,hidraw6: USB HID v1.11 Keyboard [Gaming keyboard] on usb-0000:00:14.0-1.1.2/input2
Switched to clocksource tsc
scsi 4:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Console: switching to colour frame buffer device 320x90
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:6c: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
sd 4:0:0:0: [sdc] 62748672 512-byte logical blocks: (32.1 GB/29.9 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] No Caching mode page found
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI removable disk
random: nonblocking pool is initialized
bio: create slab at 1
bio: create slab at 1
bio: create slab at 1
raid6: sse2x1 10030 MB/s
raid6: sse2x2 12602 MB/s
raid6: sse2x4 14390 MB/s
raid6: avx2x1 19342 MB/s
raid6: avx2x2 22444 MB/s
raid6: avx2x4 25722 MB/s
raid6: using algorithm avx2x4 (25722 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 31735.000 MB/sec
bio: create slab at 2
Btrfs loaded
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8073212k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:8073212k SSFS
systemd-udevd[448]: starting version 204
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input15
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
hid-multitouch 0003:03EB:8A0C.0001: input,hidraw7: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2987)
usbcore: registered new interface driver btusb
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:02:00.0: irq 64 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40e59a05
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x0000009a
SKU: external_amp=0x0
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x12
realtek: No valid SSID, checking pincfg 0x40e59a05 for NID 0x1d
realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0282
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
Bluetooth: hci0: read Intel version: 370710018002030d33
Bluetooth: hci0: Intel device is already patched. patch num: 33
iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a2877
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input24
asus_wmi: Backlight controlled by ACPI video driver
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
type=1400 audit(1396826140.287:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=673 comm="apparmor_parser"
type=1400 audit(1396826140.287:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=673 comm="apparmor_parser"
type=1400 audit(1396826140.287:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=673 comm="apparmor_parser"
intel_rapl: domain uncore energy ctr 57455:57455 not working, skip
type=1400 audit(1396826140.371:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=722 comm="apparmor_parser"
type=1400 audit(1396826140.371:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=722 comm="apparmor_parser"
type=1400 audit(1396826140.371:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=722 comm="apparmor_parser"
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x671f07)
psmouse serio4: elantech: Synaptics capabilities query result 0x40, 0x15, 0x0e.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input23
btrfs: device fsid 2b581497-931e-4991-8a41-1920dcf48b2b devid 1 transid 105 /dev/dm-3
btrfs: device fsid 2b581497-931e-4991-8a41-1920dcf48b2b devid 1 transid 105 /dev/dm-3
btrfs: device fsid 2b581497-931e-4991-8a41-1920dcf48b2b devid 1 transid 105 /dev/dm-3
btrfs: device fsid 2b581497-931e-4991-8a41-1920dcf48b2b devid 1 transid 105 /dev/dm-3
btrfs: device fsid 2b581497-931e-4991-8a41-1920dcf48b2b devid 1 transid 105 /dev/mapper/crypt
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
init: failsafe main process (956) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (1110) terminated with status 1
type=1400 audit(1396826146.739:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.739:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.739:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.739:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.739:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.739:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1202 comm="apparmor_parser"
type=1400 audit(1396826146.951:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1090 comm="apparmor_parser"
type=1400 audit(1396826146.951:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1090 comm="apparmor_parser"
type=1400 audit(1396826146.955:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1205 comm="apparmor_parser"
type=1400 audit(1396826147.171:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1211 comm="apparmor_parser"
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (1316) terminated with status 99
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1469) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
HDMI: ELD buf size is 0, force 128
HDMI: invalid ELD data byte 0
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
systemd-hostnamed[3977]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[4181]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-1.3: new high-speed USB device number 10 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-hostnamed[4278]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 10
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 11 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 11
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 12 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 12
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 13 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 13
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 14 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 14
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 15 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=05ac, idProduct=12a8
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: iPhone
usb 1-1.3: Manufacturer: Apple Inc.
usb 1-1.3: SerialNumber: 4ef0a802e429a3d10f95fda7eee7450b61e14840
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
usb 1-1.3: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet device attached
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ipheth 1-1.3:4.2: ipheth_rcvbulk_callback: urb status: -71
usb 1-1.3: USB disconnect, device number 15
ipheth 1-1.3:4.2: Apple iPhone USB Ethernet now disconnected
usb 1-1.3: new high-speed USB device number 16 using xhci_hcd
usb 1-1.3: New USB device found, idVendor=174c, idProduct=55aa
usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1.3: Product: RVS02 SuperSpeed
usb 1-1.3: Manufacturer: SST
usb 1-1.3: SerialNumber: 0000000000000001BA
usb-storage 1-1.3:1.0: USB Mass Storage device detected
usb-storage 1-1.3:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi5 : usb-storage 1-1.3:1.0
scsi 5:0:0:0: Direct-Access SST RVS02 SuperSpeed 1.3 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 5:0:0:0: [sdd] No Caching mode page found
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] No Caching mode page found
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 5:0:0:0: [sdd] No Caching mode page found
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] Attached SCSI disk
EXT4-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[5349]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-1.3: USB disconnect, device number 16
sd 5:0:0:0: [sdd] Unhandled error code
sd 5:0:0:0: [sdd]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 5:0:0:0: [sdd] CDB:
Read(10): 28 00 08 27 00 3f 00 00 20 00
end_request: I/O error, dev sdd, sector 136773695
sd 5:0:0:0: [sdd] Unhandled error code
sd 5:0:0:0: [sdd]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 5:0:0:0: [sdd] CDB:
Write(10): 2a 00 07 44 00 3f 00 00 08 00
end_request: I/O error, dev sdd, sector 121897023
quiet_error: 33 callbacks suppressed
Buffer I/O error on device sdd1, logical block 15237120
lost page write due to I/O error on sdd1
JBD2: Error -5 detected when updating journal superblock for sdd1-8.
Aborting journal on device sdd1-8.
JBD2: Error -5 detected when updating journal superblock for sdd1-8.
EXT4-fs error (device sdd1): ext4_put_super:791: Couldn't clean up the journal
EXT4-fs (sdd1): Remounting filesystem read-only
systemd-hostnamed[5599]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5788]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[6922]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!